Audi URS4 AAN engine with both supercharger and turbo.
5 cyl
COP
850cc injectors
Power target 700hp
2.2l
original wastegate, idle control etc
Progress to date:
New installation of VEMS 3.6 on 1.1.95 with separate 55pin to EC18/36 connector soldered a cording to an AAN_Build_Doc and pinout received with the unit. Still have to solder the PC interface connector - not sure about the pinout.
I'm also not clear as to how to load the config files / set them up for the injector size, nor any other small setup/configs to do. I have worked with 55pin VEMS before on this car (borrowed from a mate) and it ran well. So tuning etc relatively comfortable with - but the unit came setup already for AAN, this time I had to use GEN 3.6.