I am modifying an 88 Honda Legend. There are 2 stages to this At the moment i have a c20at motor which is a 2 litre turbo V6 that i am in the process of transplanting that i will drive while i build my secont motor. It is wired up with the wiring loom from a c27a (the original motor from the car). I am going to build a 2.7 litre turbo motor from a N/A c27a that will hopefully go in the car in about 18 months time.
I would like to design a vems computer to run this but have a lot of questions.
Just for a start off will i be able to wun it through my wiring loom with a couple of sensors added or will i need to get a new loom?