MembersPage/AndreasThulin (2005-11-08 15:01:24)

Planning VEMS 3.3 for turbocharging BMW M50B25 engine in an BMW E36.\n

Enigne Spec:
M50b25 without vanos
Je Forged Pistons Compression 8,1:0 
MLS headgaskset 1,8mm
ARP headstuds
500cc injector
Preicison Turbo SC-44
Tial 38mm wastegate
50mm PPF blow-off.
600x300x75mm intercooler 
Sachs heavy pressureplate
Walbro fuelpump
Primary trigger: VR
Cam Trigger: VR 

Ordered the following 6/11-2005\n

1 x Assembled v3.3 controller (v3.3)
	secondary_trigger HALL
	primary_trigger HALL
	PowerFlyback yes
	MAP connection 400kPa onboard (6x4mm pneumatic)
	ignition driver 6+2
	Knock and EGT yes
	LCD and PS2 yes
1 x Econoseal18-Wire 
1 x EconoSeal36-Wire 
3 x Injector connector 	pincount 2
3 x Injector connector 	pincount 3
1 x LCD4x20 (LCD4x20) 	Color blue
3 x VEMS sticker Color red
1 x EGT sensor (K-type) (2x90mm)
10 x K-compensational cable 
1 x K-thermocouple connector Sex pair
4 x Temperature sensor 
1 x Wideband O2 sensor (LSU4)
1 x Wideband connector	With wire with crimped wires
1 x DSUBxx connector