Hi Marcell
I have set up this project page for the issue I have with no injectors or coils firing, after having the ecu repaired (Chip replaced) for pegged exhaust temp @ 1200 deg.
I have uploaded files here.
http://www.vems.hu/filethingie.php?action=list&subdir=Audi S2 3B Alex J
There are log files and config before the ecu was sent away. the config file that was on the ECU when I received it back. also a trigger log done after I received the ecu back when I was investigating the no start issue.
the care is a 3B engine using an ANN ecu. pins have been swapped in the motronic55 female connector. car was running as you can see from the log I uploaded.
ECU serial number is 1450
firmware 1.1.95 although 1.1.96 was installed when I received it back. I think I changed it to 1.1.96 just before I removed it to send away.