VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of MembersPage/Sascha/MINTGTI
Older Newer
2008-10-19 16:28:00 . . . . MembersPage/Sascha [added ECU info]
2008-10-15 00:39:29 . . . . MembersPage/Sascha [updated]
2008-10-13 04:42:42 . . . . MembersPage/Sascha [need an answer about PWMing a VVT solenoid.. please :)]
2008-10-08 03:05:41 . . . . MembersPage/Sascha [question about using the boost control option to PWM a VVT solenoid... ideas??]
2008-10-08 03:04:54 . . . . MemebersPage/Sascha [question about using the boost control option to PWM a VVT solenoid... ideas?]
2008-10-08 03:03:19 . . . . CPE00068c1a2eb1-CM001ade8452a2.cpe.net.cable.rogers.com [added question about using the boost control option to PWM a VVT solenoid... any]
2008-10-08 02:58:44 . . . . CPE00068c1a2eb1-CM001ade8452a2.cpe.net.cable.rogers.com [added page]

Changes by last author:

Changed:
Stock 60-2 trigger wheel
Stock 60-2 trigger wheel, no cam sync.
Changed:
New planned ECU: VEMS V3.3 w/ 30V flyback & 1.0.78RC2 w/ 16x14 .

Which brings me to a big question:

**Can I control the PWM VVT solenoid(s) with the VEMS using the PWM control used for the boost solenoid? Currently I'm only interested in controlling the intake cam. If there is any further information you would need to help answer that question, let me know. I will try to have the solenoid scoped as soon as possible.

New ECU: VEMS V3.3 w/ 30V flyback

ECU Info:

Board_version=v3.3

Serial_nr= 1871

pump-= 3.98V

wbo2_pump_pw_zero=0x63

wbo2_nernstdc_target=0x88

pump+= -3.1mV/200 Ohm

AREF=4.9V

(C103=1nF, no D100)

Added:
Planning on running 1.1.43 firmware on this install if tests ok on BMW E30.