factory: 2.7L, 162 kW (220 PS; 217 hp)

NA engine from the factory, however, twin turbo fitted on this engine, sounds impressive.

* Located where ?

* Manual tranny ?

If manual transmission, should not be too difficult to control with [VEMS ECU].

note: request from Cesar (originally at shop-order processing channel, not suitable for tech-discussions).

However uncertain about any "plug-n-play" version for the factory harness. What connector does it use ?

* pincount / arrangement ?

* pic ?

* other engines/factory harnesses that are known to use same connector ?

* Beware: even with a highly polished "PNP" solution for the factory harness, tuning is needed, because of the turbo mod (obviously)

** connecting the engine (either via factory harness or adapter or custom harness) and starting the engine can be done with remote-control

** but tuning for the actual turbos (and cams and wastegates, ...) => someone local (who tuned some other engine before)

Does it have [ETC] ?

* dummy type ?

What extra loom branches needed (side by factory harness) ?

* WBO2

* 2 * wastegate boostcontrol solenoids

* ... ?

----

Trigger info ?

* HALL, HALL ?

** 60-2 or some other pattern ?

Camshaft VVTI 0/2/4 cams ?

----

Anything special ?

----

injectors

* high-Z ? (resistance = ... Ohm)

* cc /min ?