Changes by last author:
Added:
|
* Ford Focus ST 2005-2011 HYDA Engine code.
---- New measures: Note: R30=27K on every measure, "MVR+" means Motronic VR input, "MVR- means Motronic VR GND, "Vin" means Vems EC36/27. 1. Measure: MVR+ 1k to Vin. Voltage= 0.09V MVR- 1k to GND. Voltage 0.04V Note:some RPM fluctating, There are trigger error around 5krpm, There wasn't check engine light on idle. https://drive.google.com/open?id=1Q426MQgFbm0FgfLLGj-NcZycgruu1Lt1 2. Measure: MVR+ 1k to Vin. Voltage= 0.09V MVR- 500 ohm to GND. Voltage 0.02V Note: RPM fluctating, There are trigger error around 5krpm, There was check engine light on idle. https://drive.google.com/open?id=1wveGA_rbgIwj3bZnQ7NIaogzofe_VusG 3.Measure: MVR+ 1k to Vin and pulled up to 5V with 27k ohm. Voltage= 0.3V MVR- 500 ohm to GND. Voltage 0.03V Note: RPM signal bad around idle, high rpm seems good but on 6500-7000rpm got trigger error. https://drive.google.com/open?id=11zUAMi8DWhclIZuPnAHarDIuU65LqGHd 4.Measure: MVR+ 1k to Vin and pulled up to 5V with 18k ohm. Voltage= 0.4V MVR- 500 ohm to GND. Voltage 0.04V Note: RPM signal bad around idle, high rpm seems good but on 6500-7000rpm got trigger error. 5.Measure: MVR+ 1k to Vin and pulled up to 5V with 27k ohm. Voltage= 0.31V MVR- 500 ohm to GND. Voltage 0.06V Note: bad idle signal, bad high rpm signal, 6.Measure: MVR+ 1k to Vin and pulled up to 5V with 27k ohm. Voltage= 0.3V MVR- 100 ohm to GND. Voltage 0.01V Note: bad everywhere 7.Measure: MVR+ 1k to Vin and pulled up to 5V with 31.7k ohm. Voltage= 0.27V MVR- 100 ohm to GND. Voltage 0.02V Note: bad idle, not so bad high rpm. not realy good. 8.Measure: MVR+ 1k to Vin and pulled up to 5V with 31.7k ohm. Voltage= 0.28V MVR- 2k7 ohm to GND. Voltage 0.11V Note: There are some idle fluctating, good mid RPM signal, RPM signal lost around 6500rpm. https://drive.google.com/open?id=1Q426MQgFbm0FgfLLGj-NcZycgruu1Lt1 |
| *i did. I measured 0.05V |
|
New measure
Motronic VR GND 1k to GND, Motronic VR + to EC36/27 with 1K, R30=uninstalled Measure: Motronic VR+ : 0.04V with sensor, 0.33 With sensor, Motronic VF GND: 0.03 without sensor, 0.33 with sensor. There aren't check engine light, seems stabil to 3500-4000rpm but after the rtrigger error still cames. ---- |
| ** Need the RPM signal to control the power steering pump, engine coolant fan, alternator, while not get RPM signal the display doesn't show oil pressure, oil temp on their's gauges and need for A/C controll |