== errors on my part ==

Q: anyone know why the dwell time jumps like 2x under 1000RPM?

V1.0.45

Bad tooth_wheel setting (see MembersPage/KeithHargrove/AlfaMilano/ConFig ) makes me wonder how it runs at all. Doesn't it show wheel-errors ?

it did on the bench due to a bad matching software wheel with 62-2. but 62 will not divide into 3 so the dwell was all messed up

Now it is much better with the right wheel.

But in megatune the dwell is off by one.

I had to set it to .78 to get a 1.78ms Dwell

found the Dwell problem. the dwell @6V had add 2ms in it and not 0. and I was runing around 12v it ramps. so anything less then 14v will get the some of the 6V added to it the lower the voltage the more is added.