VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of MembersPage/ChrisKendall
Older Newer
2021-04-12 12:15:39 . . . . 85-238-81-205.pool.digikabel.hu [IGBT note]
2021-04-08 06:13:48 . . . . 152.2-107-213.static.virginmediabusiness.co.uk [Need to run 16 ignition coils in twin spark configuration.]
2021-04-08 06:11:49 . . . . 152.2-107-213.static.virginmediabusiness.co.uk [Need to run 16 ignition coils in twin spark configuration.]
2021-04-08 05:56:54 . . . . 152.2-107-213.static.virginmediabusiness.co.uk [Need to run 16 ignition coils, help!?]
2017-05-19 22:59:15 . . . . catv-80-98-142-196.catv.broadband.hu [Alternator spike ? Is flyback connected ? Which 2 injector outputs btw ?]
2017-05-18 15:41:18 . . . . genkt-049-222.t-mobile.co.uk [2 x injector channel not working]
2014-06-29 13:28:14 . . . . 94.196.247.15.threembb.co.uk [Done over 10000km! only issues left: knock,cranking and occasional stumble in so]
2014-06-29 13:08:02 . . . . 94.196.247.15.threembb.co.uk [config file uploaded for verification. knock sensor setup ]
2014-06-29 09:19:20 . . . . 94.196.247.15.threembb.co.uk [email]
2013-05-29 10:51:59 . . . . catv-80-98-222-153.catv.broadband.hu [ignout-real cyl]
2013-05-29 10:51:30 . . . . catv-80-98-222-153.catv.broadband.hu [ignout-real cyl]
2013-05-25 07:52:44 . . . . 92.41.190.194.threembb.co.uk [knock code]
2012-10-25 19:29:18 . . . . 94.196.162.224.threembb.co.uk [knock settings?]
2012-09-23 18:41:18 . . . . 94.197.7.105.threembb.co.uk [update]
2012-06-25 11:45:15 . . . . adsl180-40.pool.businesstel.hu [sectrig=HALL]
2012-06-24 19:24:54 . . . . 94.196.13.231.threembb.co.uk [email]
2012-06-24 19:22:09 . . . . 94.196.13.231.threembb.co.uk [data]
2012-06-24 18:40:29 . . . . 94.196.13.231.threembb.co.uk [info]

Changes by last author:

Changed:
The coils draw 7.5 amps. Can I run 2 per igbt? If not can I upgrade my ibgt's to ones that will take the load? Will the rest of the ecu be OK? Thanks
* coils draw 7.5 amps (peak ?)

** Can I run 2 per IGBT ?

** IGBT-s are able to drive 15A peak (this also depends on dwell time: RMS average should be 10A max) if cooled properly (but the cooling is well tested and proven for 7A RMS, 10A peak)

** 2 IGBT driven from the same gate signal is also possible (source is also same: = power GND)

* Will the rest of the ecu be OK?

** yes