Changes by last author:
Added:
|
Useful tool was written in couple with Roman (VC++ GUI guy).$FlgChr1$FlgChr> It implements slighly improved algorithm from firmware dropped VE learning, but for PC.$FlgChr2$FlgChr> It has very user frendly interface.
*Color cells, bright red - high egt, dark red - knock (4000rpm 150kPa at my screen), green - 1% shoot, yellow - 3% shoot, blue - locked by user. *Show load marker (4600rpm 180kPa at my screen) *Show average deviation for each cell, therefore allow accuracy manual cell edit. *Show linear gauge not only for AFR, but for target too. With gradient color by rich/lean condition. *Use both EGO and AFR+Target, therefore 1.1.51 has changes in RT data for better precision lambda and target. *Works very fast with user help, allow draw accuracy map from clear sheet for minutes without any logs. *Show warnings with red color, gets treshold values for CLT, EGT, AFR, Knock from warning light config. DutyCycle warning at 90%. *Save/restore full tuning session, table with 16bit values, deviations and color attributes. $FlgChr3$FlgChr> But it is still pre alpha testing, many things are still absent, and works only for 1.1.51 with alternative knock solution and warning light defined for a while.My settings$FlgChr4$FlgChr> Extrapolation scale factor, rpm - 20-80, i use 50$FlgChr5$FlgChr> Extrapolation scale factor, kpa - 10-50, i use 25$FlgChr6$FlgChr> Min coolant for auto modifications of VE - i use 170, it is 70C$FlgChr7$FlgChr> RPM scaling factor - same as VElearning, 20-40, i use 20$FlgChr8$FlgChr> KPA scaling factor - same as VElearning, 20-40, i use 20$FlgChr9$FlgChr> EGO scaling factor - same as VElearning, i use 0$FlgChr10$FlgChr> Speed of changes to the VE table - 50-255.$FlgChr11$FlgChr>
|
