| [Start] | [Engine] | [Trigger] | [Fuel] | [Ignition] | [Gallery] |
I`m located in Novi Sad,Serbia.
Installing VEMS Genboard v3.3 on M20B27 BMW engine.This is my first VEMS project,and first standalone project ever,so i would need all the help i can get! :) Tnx
News
12.11.2007.
- After some problems with trigger setup (reversed polarity) i have started the engine.Engine is tuned mostly (using it for daily driving).
- TODO:
- Install IAC control
- Tune cold start (i need to hold throtle pedal for few mins)
- Tune high RPM's and loads
- Get it dyno tuned after everything is done
- TODO: