Changes by last author:
Added:
|
hello, do you know when the Box will arrive at my house, because I have no news even by writing here?
---- It is indeed a 3B engine harness with 5 TFSi coils with the recovery of the signals from this one with the econoseal 10 pinout plug, the vems with the number 19229 and 9297 work correctly on Audi S2 3B "I only use the computer, the tablet and the phone are at the bottom of Lake Balaton... :)" -Audi S2 3B stroker setup -Turbo GTX3076R -2200cc injector E85 -Cam 7A - Cylinder head prepare under three angles -Super teak valve -Wossner piston -TFSi coil -Wagner collector -2.7 bar turbo pressure ---- |
|
---- Audi S2 3B stroker setup -Turbo GTX3076R -2200cc injector E85 -Cam 7A - Cylinder head prepare under three angles -Super teak valve -Wossner piston -TFSi coil -Wagner collector -2.7 bar turbo pressure |
|
Generic instructions : http://www.vems.hu/wiki/index.php?page=MembersPage (eg. so you can create more wiki pages easily).
Please edit your page, write or link all information about your engine and project (including measurements and config) thematically... Support is only possible if the most uptodate information is seen with no misunderstanding. |
| * correct engine-and-harness must be used |
| Generic instructions : http://www.vems.hu/wiki/index.php?page=MembersPage (eg. so you can create more wiki pages easily). |
| ** (verify, make measurements of GND, supply, and resistance of CLT and MAT sensors via the mot55 connector, take note of estimated engine temperature) |
| Please edit your page, write or link all information about your engine and project (including measurements and config) thematically... Support is only possible if the most uptodate information is seen with no misunderstanding. |
|
correct engine-and-harness must be used
(verify, make measurements of GND, supply, and resistance of CLT and MAT sensors via the mot55 connector, take note of estimated engine temperature) |
|
* save known good config ** publish known good config on your page * save wrong config ** publish wrong config labeled as such * upload good config to Audi3B/8815 ECU |
|
save known good config
publish known good config on your page save wrong config publish wrong config labeled as such upload good config to Audi3B/8815 ECU |
| regards, ... |
|
regards, ... |