VEMS Turbolamik automatic gearbox support
Order [CAN_Dash] with AIM-AIM option:
TODO: needs update ... Message format (see AIM pdf for more info) (note: units might need review, especially temperature; 16bit = 2 byte values have low byte first = little endian unless otherwise noted)
- CAN ID, Byte, (Bits), Gain/unit, Data type
- 6F0, 0, (0:16), 1, RPM
- 6F0, 2, (0:16), 1, WHEELSPEED
- 6F0, 4, (0:16), 1, OILPRESSURE
- 6F0, 6, (0:16), 1, OILTEMP
- 6F1, 0, (0:16), 1, WATERTEMP
- 6F1, 2, (0:16), 1, FUELPRESSURE
- 6F1, 4, (0:16), 1, BATTERYVOLTAGE
- 6F1, 6, (0:16), 1, THROTTLEANGLE
- 6F2, 0, (0:16), 1, MANIFOLDPRESS
- 6F2, 2, (0:16), 1, AIRCHARGETEMP
- 6F2, 4, (0:16), 1, EXHAUSTTEMP
- 6F2, 6, (0:16), 1, LAMBDASENSOR
- 6F3, 0, (0:16), 1, FUELTEMP
- 6F3, 2, (0:16), 1, GEAR
- 6F3, 4, (0:16), 1, ERRORS
- 6F3, 6, (0:16), 1, constant 0xFC30 (sent as 30, FC little endian value) ?
- 6F4, 0, (0:16), 1, 0xFB, 0xFA
- 6F4, 2, (0:8), 1, 1 byte checksum (sum of above bytes)
https://manual.turbolamik.eu/docs/can-communication/read-old-can-type-6/
Note: + 1 analog input is recommended for transbreak powercut
See also: AimCanBusMessages