This page documents the parts required for stage one of the project.
| Part | Quantity | Price | Total | Comments |
| Components | ||||
| Genboard v3.2 | 1 | 199.00 | 199.00 | |
| 2.5 bar MAP sensor | 1 | 23.00 | 22.80 | |
| Stepper driver | 1 | 3.00 | 3.00 | Run the factory idle setup |
| FET drivers | 3 | 1.90 | 5.70 | 2 banks of injectors, and 1 channel WBO2 |
| Temperature sensor | 1 | 0.90 | 0.90 | Cheap fix for MAT |
| WBO2 sensor | 1 | - | - | From stocks |
| Case | ||||
| Alubos case with 6 drill holes | 1 | 26.60 | 26.60 | Extra drilling for later upgrades |
| Alubos EC frontplate aluminium | 1 | 11.20 | 11.20 | |
| Alubos endplate aluminium | 1 | 8.00 | 8.00 | |
| Alubos gasket | 2 | 2.00 | 4.00 | |
| Clamping plate | 3 | 5.00 | 15.00 | |
| Loom | ||||
| Econoseal 36 PCB | 1 | 11.00 | 11.00 | |
| Econoseal 36 wire | 1 | 9.00 | 9.00 | |
| Econoseal 18 PCB | 1 | 7.00 | 7.00 | |
| Econoseal 18 wire | 1 | 8.00 | 8.00 | |
| WBO2 connector | 1 | - | - | From stocks |
| Extras | ||||
| VEMS sticker | 1 | 0.00 | 0.00 | Advertising under the hood |
| VEMS ECU badge | 1 | 0.00 | 0.00 | Advertising on the case |
| Gold Serial jack kit | 1 | - | - | From stocks |
| Gold DSUB9 male | 1 | - | - | From stocks |
| Total (Euro) | 331.20 | |||
Back to MembersPage/RichardBarrington/TonysCapri
Back to MembersPage/RichardBarrington