My own street car. It works with VEMS since 2018.
VEMS 3.8b (diy kit)
firmware: 1.2.38
hc-06 bluetooth (diy)
7" screen built in 1 din car audio
Engine: 2.2 MC stock bottom end
Cylinder head: OEM with ARP Head Studs, FCP springs, Inconel valves
Camshaft: custom 272˘
Ignition: Audi TFSI COP
Primary trigger: 60-2 VR(volvo 2 wire sensor) custom trigger
Secondary trigger: OEM distributor with 1 teeth
Pinout:
VEMS 3.8
TPS GND black
SIGNAL pink/white
5v+ ref pink
CAM GND black
SIGNAL pink/white
5v+ ref light red
CLT GND blue
SIGNAL blue/black
MAT GND brown
SIGNAL blue/yellow
IDLE 12v+ red
SIGNAL white
CRANK 5v+ ref grey/red
SIGNAL grey
sensor GND black/white
INJ1 12v+ yellow
SIGNAL yellow/grey
INJ2 12v+ yellow
SIGNAL yellow/brown
INJ3 12v+ yellow
SIGNAL yellow/purple
INJ4 12v+ yellow
SIGNAL yellow/red
INJ5 12v+ yellow
SIGNAL yellow/white
COIL1 12v+ red
sensor gnd black
SIGNAL green/black
test yellow
COIL2 12v+ red
sensor gnd black
SIGNAL green/white
test yellow
COIL3 12v+ red
sensor gnd black
SIGNAL green/red
test yellow
COIL4 12v+ red
sensor gnd black
SIGNAL green/yellow
test yellow
COIL5 12v+ red
sensor gnd black
SIGNAL green/brown
test yellow
O2 4.9 ec18 pin9 red
ec18 pin7 yellow
ec18 pin13 black
ec18 pin18 white
15+ fused grey
check/warning light output ec18 pin4 white (gnd)
launch control input ec18 pin2 analog ch5 black(gnd)
MAIN RELAY
FUEL PUMP RELAY