Current VEMS Projects
GenBoard/VerThree
This is the full-featured ECM solution. Anything you name, most likely v3 does it already, or it just need software support.
AfreshTiny
The AfreshTiny is the working name for our round 52mm WideBand 02 meter. Very simple compared to v3: only the wideband part with LED display. For the masses. Ready for manufacturing.
Future VEMS Projects
VemsFrontier/Boards
This is a set of boards with less features than v3, but good networking capabilities. Mostly ARM based. Big power, but economical manufacturing is a concern. Some of them are very close to manufacturing.
Unscheduled VEMS Projects
These would be useful, but not real urgent, as they provide nothing that couldn't be solved with v3 and off-the-shelf hardware. (they will cut costs once the demanded quantity justifies manufacturing).
TakeCareBoard
Low power board that can be turned on all day
RadioBoard
Radio solutions
GoBox
This is a guest-project. Activity seems to have stalled. Goal is to define a solution specialized to the challenge to make Internal combustion Motors run with minimal amounts of Hydrocarbon based combustibles.
Obsolete VEMS Projects
These boards were experimental (used for prototyping, verify ideas or calibrate values) and will not be manufactured in the future
AfreshBoard
Features a less space and resourse efficient Wideband circuit, 2ch egt amps, same knock chip as on the GenBoard v3, a few inputs for resistive sensors, all free pins available at headers and some proto space. There has never been firmware support for this, developer only board.
GenBoard/VerTwo
This was our first ECM solution, before v3. The same firmware source is used as for v3, but recompile is needed with GENBOARD in my_make instead of GENBOARDv3. This means firmware support is not dropped, even some new features are available from time to time (if compile problem is reported, it will be fixed on demand).