We're a group of 5 students that are doing our last (third year) on a
Swedish High School and we're going to install and use GenBoard v3 on a
SAAB 9-5 4-Cyl Turbo. Since this area is rather new for us we'd be glad if
any of you could
give us some help and tips.
We're looking after a basic config that could match our projekt.
We're going to proceed this operation on a 4-Cyl SAAB 9-5 Turbo from -99,
the car's electrical
system is heavy injured by some soft headed youths who came up with the
bright idea to fill
the car with wather. Our teacher gave us this assignment in hope that we
could solve this.
We will buy the following parts;
LCD4x20 + Keyboard
ASSAMBLED v3.3 Controller
Econoseal 36-harness
Econoseal 18-harness
We have gone trough the VEMS manual and with some progress we discussed the
operation.
The major 'problem' is that after we've installed the GenBoard we need a
basic FirmWare
that will be fitted for our system (we think).
As you might been noticed we're all newbies on this area so we'll be VERY
glad if we could
recive any kind of help from you.