VolksWagen VR6 Turbo
I have a 1994 VW Golf MkIII 2,8 VR6 (AAA engine code).
The goal is 350 Hp
My setup will be:
* t04 turbo
* bone stock engine
* large 600x300x75 intercooler
* 3" pipeing
* VEMS engine magement
* 727 siemens injectors
My vems is:
* 6+2 igniton
* non ps2
* 30v flyback
* 410 kpa MAP
* EGT no
* Knock no
My first question is how the reference tooth table should be, with stock 60-2 tooth wheel and 15 degree cylinder angle???
I guess with the 1 5 3 6 2 4 fireing order it would be 0 20 40 3 23 43 Traversed backwards of course. But the second half is late by 3 degree. How can I solve that should I write 2,5 22,5 42,5 or in the individula cylinder advance option I take 3 degree????
Do you have any solution for this????
use ref table 0 40 20 0 40 20
Then how can I determinate the timing of the cylinders with 15 degree offset between each cylinder lines????
What is the correct Primery trigger setting for me???
rising edge
missing tooth
n-2
normal
60
58
420
6The next trigger tooth is determinating if you want to change in 15 degree for the each cylinder lines??? Like 153 is 60 degree from BTDC but the next half is 75 degree because it's a 15degree v6 engine. How can i set the correct cylinder fireing????