VolksWagen VR6 Turbo
I have a 1994 VW Golf MkIII 2,8 VR6 (AAA engine code).
The goal is 350 Hp
My setup will be:
* t04 turbo
* bone stock engine
* large 600x300x75 intercooler
* 3" pipeing
* VEMS engine magement
* 727 siemens injectors
My vems is:
* 6+2 igniton
* non ps2
* 30v flyback
* 410 kpa MAP
* EGT no
* Knock no
My first question is how the reference tooth table should be, with stock 60-2 tooth wheel and 15 degree cylinder angle???
I guess with the 1 5 3 6 2 4 fireing order it would be 0 20 40 3 23 43 Traversed backwards of course. But the second half is late by 3 degree. How can I solve that should I write 2,5 22,5 42,5 or in the individula cylinder advance option I take 3 degree????
Do you have any solution for this????
I have read every vr6 project but they are so old they don't have H0 in the old 1,0,73 firmware
use ref table 0 40 20 0 40 20