MembersPage/TyGymProjekt (2005-10-12 12:29:56)

Only add your page to the MembersPage, don't replace it. This is your page to do whatever you want with. //MembersPage/MattiasSandgren


We're a group of 5 students that are doing our last (third) year on a Swedish High School and we're going to install and use GenBoard v3 on a SAAB 9-5 4-Cyl Turbo.

Since this area is rather new for us we'd be glad if any of you could give us some help and tips.

We're looking after a basic config that could match our projekt.

We're going to proceed this operation on a 4-Cyl SAAB 9-5 Turbo from -99, the car's electrical system is heavy injured by some soft headed youths who came up with the bright idea to fill

the car with wather. Our teacher gave us this assignment in hope that we could solve this.

We will buy the following parts;

LCD4x20 + Keyboard

ASSAMBLED v3.3 Controller

Econoseal 36-harness

Econoseal 18-harness

We have gone trough the VEMS manual and with some progress we discussed the operation.

The major 'problem' is that after we've installed the GenBoard we need a basic FirmWare that will be fitted for our system (we think). As you might been noticed we're all newbies on this area so we'll be VERY glad if we could recive any kind of help from you.