MembersPage/SamiKorhonen/NewFirmwaretoVerTwo (2006-03-16 04:43:08)

The same firmware and MegaTune that was used back in the old days for GenBoard/VerTwo (in 2003) should work today as well. Limited a bit, since


Made a diff file for firmware version 1.0.18. look here http://kotisivu.dnainternet.net/sakrkorh/fw/ . Just commented out few things which I don't have any idea. Now it compiles but haven't tested yet. Boostcontrol is difficult to go around cleanly.


Working with MT-r027 release. See new diff in last link. Fw compiles and I can use MT to change all setting. Problem is that there is no signal on fet driver. Is there some new config setting that causes this? Please help with this problem.

Do you have config and other logs, measurement data ?

Most common mistake is to misconfigure fuelcut_min_kpa.

Added config files same place. PW gauge shows in MT that there should be squirt, but there isn't. Tested fuelcut_kpa settings, it works fine and PW goes to zero when kpa is under min_kpa. There might be some erratic settings in config files.

Also notised that poweron fuelpump pulse works but after that it doesn't give signal when there is rpm avaible. Maybe related to other problems.