MembersPage/RichardBarrington/CapriBOM (2005-03-02 23:29:35)

This page documents the parts required for stage one of the project.

PartQuantityPriceTotalComments
Components
Genboard v3.21199.00199.00
2.5 bar MAP sensor123.0022.80
Stepper driver13.003.00Run the factory idle setup
FET drivers31.905.702 banks of injectors, and 1 channel WBO2
Temperature sensor10.900.90Cheap fix for MAT
WBO2 sensor1--From stocks
Case
Alubos case with 6 drill holes126.6026.60Extra drilling for later upgrades
Alubos EC frontplate aluminium111.2011.20
Alubos endplate aluminium18.008.00
Alubos gasket22.004.00
Clamping plate35.0015.00
Loom
Econoseal 36 PCB111.0011.00
Econoseal 36 wire19.009.00
Econoseal 18 PCB17.007.00
Econoseal 18 wire18.008.00
WBO2 connector1--From stocks
Extras
VEMS sticker10.000.00Advertising under the hood
VEMS ECU badge10.000.00Advertising on the case
Gold Serial jack kit1--From stocks
Gold DSUB9 male1--From stocks
Total (Euro)331.20

Back to MembersPage/RichardBarrington/TonysCapri

Back to MembersPage/RichardBarrington