Hi!
I want to buy VEMS and put it to my UrS4 AAN. I want to keep an original sensors, wires etc.
I have intention to order Assembled v3.3 controller in this setup:
1-wire interface: NO
Flyback: 30V
ignition driver: 0
Knock and EGT: YES (with second knock sensor input wire to EC18pin2)
LCD connection: NO
MAP connection: 400kPa (6/4mm pneumatic)
mounting-style: NO-SCREWS
primary_trigger: VR
PS2 connection: NO
secondary_trigger: AUDITRIGGER
I hope, that the configuration what I chose will allow me to trouble-free connect and start VEMS.