MembersPage/NanassyPeter/GeneralControlandLogbox (2008-02-09 14:17:56)

GeneralControlandLogbox

Main porpuse is to use on cars as a supplementary and logging box.

Need a special firmware (and firmware only,no hardware changes are allowed,for compatibility!!)

Proposal:

Spark table > transform to a 60Hz fixed frequency 0-255 controllable PWM output (to drive a magnetic valve).Accuracy needed!

VE table remains unchanged,basically for Auxilary injectors,in this special case Water injection.

Boost table in open loop configuration for boost control via 2 fuel injectors paired ("air injectors")

Will need as much as possible 0-5V inputs,please specify which pins will be logged,and how they are named in the log.

The box will run on a 60-2 trigger with VR sensor.Will get RPM,TPS,CLT,MAT,MAP,EMAP signals.

Compensations on all outgoing channels (Spark,VE,Boost) are not clear yet!(Would be practical to disable them)

I order the box linking this wikipage.

Thanks,pnanassy