BMW E30 323 with M20B25
The goal
A full featured Genboard on a turbo-charged engine:
- Sequential fuel injection (low-Z 720 cc/min)
- Wastefire ignition (60-2 trigger wheel)
- Boost control
- EGT monitoring
Question to Emil: What MAP connection will you put on the Alubos case? Peppe wants to know so that he buys the right hose and connectors.
History
I'm helping a local guy with installing a Genboard on a M20B25 BMW inline 6 cyl engine with Bosch L-jetronic electronics and intake and distributor ignition. The M20B25 originally doesn't come in this configuration (Motronic only) but a previous owner swapped out the block and head of the 323 for 2.5 litre parts and retained the electronics and intake (very stupid, engine ran lean on too small injectors). The stock harness will be cut-up and partly re-used and directly wired to EC connectors - a lesson learned from a previous BMW 728 project with similar electronics, meaning the stock L-jetronic connector and box will not be used.