Gustavs Westfield
This car is based on a Westfield kit:
http://www.westfield-sportscars.co.uk/se.html
The engine is a 2.0 litre Opel DOCH 16 valve engine, model name C20XE.
Stage 1 setup with Genboard v3.x
The engine is equipped with the following:
- Stage 1 cam upgrade (208 bhp) : ENEM Z7/Z27
- ITB setup from BMW S14
- Somewhat modified extractor exhaust manifold from GSi engine
- High impedance injectors, 340 cc/min (with 30V TS diode flyback)
- Bosch wasted spark coilpack from a -94 Opel (Astra?)
- Primary trigger is the stock 60-2 on the crank
- Will be mapped with Alpha-N (TPS vs RPM).
Stage 2
- Use of the cam sync signal of the C20XE engine
- Q: This seems to be a Hall sensor with markings "+, 0, -" on the connector. Is + = 12/5 Volt, 0 = signal and - = ground ?
Current status
Engine was started up with firmware 1.0.73 and Alpha-N. More to follow in a few days. Very nice potential. Will report back with config and tables.
Related projects
MembersPage/JohanErikssonluleasweden
MembersPage/TonciLoncar/OpelKadettTurbo
Pictures
