Hi my name is Kurt Årdal
The car is a 90 mod Volvo 240.
Engine: B230FT inline 4 cylinder
60-2 flywheel (Vr trigger, will get cam sync later with a hall sensor)
Siemens Deka 840cc injectors
Original coil with original distributor
Mitsubishi TD04-13C turbo @ 0.6 bar (stock B230FT turbo)
Have had it running with the Vems ecu, but had some issues with cranking, and after getting the noise cancelled, I found out that I need to check the sensor clearance at the flywheel, since I get trigger errors.
I scoped the trigger and it fluctuates between 0.6 volts, and -0,6 volts.