Navigation
- Main MembersPage/KoabiBrooks
- Ignition MembersPage/KoabiBrooks/Ignition
- Injection MembersPage/KoabiBrooks/Injection
- Wiring MembersPage/KoabiBrooks/Wiring
- Q&A MembersPage/KoabiBrooks/Questions
WIRING PAGE
Current wiring notes (note, connector names from bentley manual):
- T2f (black connector by master cyl) R/Y should be fed to VEMS FP output
- PIN 15 on EC36
- T2f (black connector by master cyl) R/W should be fed to O2 sensor heater AND fuel injector power supply
- pin 3 on LS4U is heater supply
- Is running injection supply off of this source also going to be too much?
- Who knows! add 10a inline fuse if this ends up being supply for o2 and injection
- T3d (white connector by master cyl) black should feed VEMS +12v
- Pin 25 on EC36
Connector T3d is the obvious connector in the picture. T2f is the black one directly underneath.