Navigation
Wiring Section
Current wiring notes (note, connector names from bentley manual):
- T2f (black connector by master cyl) R/Y should be fed to VEMS FP output
- PIN 15 on EC36
- T2f (black connector by master cyl) R/W should be fed to O2 sensor heater AND fuel injector power supply
- Need to know what pin on LS4U is heater supply
- Is running injection supply off of this source also going to be too much?
- T3d (white connector by master cyl) black should feed VEMS +12v
- Pin 25 on EC36