Navigation
- Main MembersPage/KoabiBrooks
- Ignition MembersPage/KoabiBrooks/Ignition
- Injection MembersPage/KoabiBrooks/Injection
- Wiring MembersPage/KoabiBrooks/Wiring
- Q&A MembersPage/KoabiBrooks/Questions
IGNITION PAGE
The plan is to go with a wasted spark setup (coilpack)
I need to figure out what the 4 pins are for on the connector. Disclaimer, the info below is all based on assumption...
- 4 pins
- 1 pin for a pair of cylinders
- 1 pin for the other pair of cylinders
- 1 pin for power supply
- 1 pin for ground
- What about rpm signal for tach? My guess is that there is no ground - power goes through sparkplugs. So perhaps the 4th wire is tach