ordered bunch of those from web shop
which is the default fitting for those sensors? weldable with sensor support or one with 1/8 npt thread?
once ordered I got them with 1/8 npt, other time weld to manifold stuff with sensor support that it could be extented deeper into exhaust.
I need most with 1/8 npt, but would like some additional ones which can be welded directly, no problem to pay for it. (you get some extra, don't have to pay for it).
- If preference (but no explicit option ) => Request in the order comment. (otherwise sent random: currently most prepackaged are weldable, not the 1/8 npt)
- Opinions are welcome.
- eg.: the hex part of the weldable fitting could be min 7mm long to make welding easier (without danger of melting the female, which is normally on during welding to protect the male thread).