I have used motec on GSXR1000 last year in a team which I had worked in. Motec M-800 is great but it is expensive. Genboard seem to have same or superior hardware specifications.
NEW, Motuner ecu tuning software
Genboard Racing Functions
GSXR1000RK3 Engine Sensors Description
Ignition timing accuracy test with Genboard_v3/Firmware2004-11-24_v11_2
My engine started with Genboard working in fully sequencial ignition (with COP´s)!!!
Motorcycle Engine eddy current dynamometer
The R1 engine is here!
Our mision is to install a Motec, but I hope to get install and test genboard in this engine, it is completely new engine, from a absolutely 0 km motobike!!!
First cycle strange firing sequence report 17-October-2005
The first turn during crancking seems to apears strange firing sequence it makes a ugly explosions during start process and dificult the starting process.
I have checked that it is not a ground loop or any electromagnetic noise. (in fact, now i am testing it with a simulator)
- latest firmware version used: v3_firmware_1.0.18
- http://www.nmine.com/msavr/config.txt (updated 17-10-2005)
- http://www.nmine.com/msavr/tables.txt (updated 17-10-2005)
- h=03 02 01 00 03 02 01 00
The above config file has some questionable settings, this is what I came up with for that engine:
tooth_wheel=07 # 8-1 teeth
crank_minper=40 # FF is too high, FF would cut spark at high-RPM
tooth_wheel_twidth1=0A #decimal 10: 45 degrees (0-720deg = 0-160 fake degrees)
tooth_wheel_twidth2=14 #decimal 20: 90 degrees. This assumes reset_engphase_after (720 degrees) is decimal 160 (hexa A0)
reset_engphase_after=82 # ???? decimal 130 ???: The trigger tooth after the trigger tooth at 540 degrees (585 degrees) 585/720*160=130 (82hex) Why not decimal 160 ?
I have no multichannel oscilloscope so I built a "channel multiplier" with resistors:
-Ign Channel 00 - 9.4k lower pulse
-Ign Channel 01 - 4.7k
-Ign Channel 02 - 2.2k
-Ign Channel 03 - 1k higher pulse
It is diferent than old testings, this time the sequence is always exacly the same. Only two ignition firings are erroneous.
Jose L Cortes
joseluis_jlc at hotmail dot com