MembersPage/JohanRius/MyMake

Here is the my_make-file i use

# This file is a sample file in CVS repository firmware/doc 
# 1) copy it from the firmware/doc/ directory (up one level to firmware/)
# 2) change it to your taste.
# It is your personal configuration file in which eg. LCD display can be enabled
# 3) recompile the firmware
# 4) save it and publish together with your config and tables files. 
# Both are very important, should you need help.

# board type:
# MY_CONF += -D GENBOARD
MY_CONF += -D GENBOARDv3
# MY_CONF += -D AFRESHBOARD
MY_CONF += -D MSNS

# When you have MC34151 chips on v3 (now standard), you need this:
MY_CONF += -D FETDRIVER_INVERTING

# LCD display
# to enable
MY_CONF += -D LCD

# specify size
#MY_CONF += -D LCD_2x16
#MY_CONF += -D LCD_4x16
MY_CONF += -D LCD_4x20

# specify character set
#MY_CONF += -D JAPANESE_LCD

# 4x3 Keyboard (almost useless)
#MY_CONF += -D KEYBOARD

# Software PWM idle valve (was: IDLE_PWM_SOFT) 
# control moved to config.iac_conf

# PS2 keyboard (very useful)
MY_CONF += -D PS2KEYBOARD

# Generate debug statistics
MY_CONF += -D BENCHMARK

# Display temperatures in Celcius
MY_CONF += -D CELSIUS

# High precision VE-table used in fuelcalculations by default
#MY_CONF += -D LOW_PRECISION_VE

# disable ignition:
#MY_CONF += -D NOIGN
# makes MISC output high after powerup (needed for bootloader, but is it used?)
#MY_CONF += -D IGN_OUT_INVERTED
# this is default for v3 (so not needed any more, but set h[2] table and config.ignchmax):
# MY_CONF += -D DIRECT_IGN
MY_CONF += -D IGN_DUALOUT

# MSTweak3000 is broken, we zero the idle bit (send status & 127) so it does not fall to knees
MY_CONF += -D MS_COMPATIBILITY

# WBO2 related config: (you need a license to enable it, see Copyright in wbo2.c)
# WBO2 support on v2 (with helper circuit) will be gone soon
MY_CONF += -D WBO2
# MY_CONF += -D HEATER_INVERTED
# MY_CONF += -D HEATER_PORT=PORTB
# MY_CONF += -D HEATER=6

# Enable 8x16 tables
# MY_CONF += -D VE_SIZE_RPM=16

# Other things ...
#MY_CONF += -D BUTTON
#MY_CONF += -D COMM_AUTO_DUMP
#MY_CONF += -D VAL_T_16BIT
#MY_CONF += -D PHASESIGNAL

# for v3 with lotsof free outputs, this is nice.
# set parameters in config (possible to disable in config as well!):
# MY_CONF += -D WOT_OUTPUT_TPS_THRESHOLD

# Programmable miscellaneous outputs (like the WOT above, but RPM, TPS and MAP can be used in conjunction)
# Possible usages: shift light, electronic boost control, N2O output, dummy secondary inj. enabling, etc.
# MY_CONF += -D MISC1OUT
# MY_CONF += -D MISC2OUT

# there are other things, which are only interesting for developers
# or serious (nonstandard) hacks: you can override almost anything. Eg LCD_MAPPING
# can select an AVR => LCD portmapping which is not standard for the given board type,
# and even the port used for DATA and the pin used for ENABLE can be chosen individually

Also i made these changes to global.h

// version number of B&G MegaSquirt
#ifdef MSNS
#define BG_EMULATION 30
#else
#define BG_EMULATION 32
#endif

Looks OK.

MS_COMPATIBILITY and MSNS options will affect communication compatibility with different tuningsoftwares. Emil is more uptodate on this than me. I guess you are using the megasquirtnspark tuningsoftware.