MembersPage/HansK/SuzukiSwiftGTIMK/WBo

WBo2


2007.05.21

The car don't have a o2-sensor and you are not allowed to add a sensor to the engine, so we have to take the wbo2 of before a race. The question is: do we have the chance any settings before unmounting the wbo2?


2006.11.09 While calibrating the WB02 controller circuit I ran in to some trouble..

Question is:

Okay thanks. After writing i calibrated with the following values:

wbo2_warmup_ramp=9C
wbo2_abs_limit=E4
wbo2_limit_maxt=A0
wbo2_fallback=60
wbo2_retry_t=06
wbo2_edgetime_corr=BA
wbo2_edgetime_min=50
wbo2_ri_target=96
wbo2_heater_pid_kp=46
wbo2_heater_pid_ki=10
wbo2_heater_pid_kd=1A
wbo2_heater_pid_ilimit=80
wbo2_pump_pid_kp=1E
wbo2_pump_pid_ki=32
wbo2_pump_pid_kd=08
wbo2_pump_pid_ilimit=86
wbo2_ri_confidence_scale=80

Don't copy these from someone else, use your own values (wbo2_nernstdc_target and wbo2_pump_pw_zero for your ECU, and wbo2_calibration for your sensors; apply appropriate changes when you change ECU or change sensor).

wbo2_pump_pid_kp=1E
wbo2_pump_pid_ki=46
wbo2_pump_pid_kd=00

MembersPage/HansK