The car is a Kadett C with a Calibra 2,0 16V C20XE engine mounted.
2006.09.13
The engine has a 60-2 trigger wheel on crank so I tried to trigger the board with the signal-generator generating a 60-2 signal (m582 1740 200 20 1000 1000) but MT shows "trigger-errors", and a datalog shows random 0RPM one or two times every second.
http://www.vems.hu/files/HansK/datalog200609122217_trigger_errors.xls
I'm using firmware/MT 1.0.53
2006.09.19
I have tried changing threshold on LM1815 with out luck.
I'd like to try to use the board to generate the trigger-signal http://www.vems.hu/wiki/index.php?page=OutputTrigger but I need firmware V1.0.53 where MY_CONF += -D WOT_OUTPUT_TPS_THRESHOLD is enabled in the my_make file.
Will some one with access to complete firmware please complile a firmware to me with this my_make file: http://www.vems.hu/files/HansK/my_make.zip
Please upload it to my side www.vems.hu/files/HansK or just send it to me: kristiankh "a" ofir.dk
Hans, a firmware image with that compile option is not needed stimout is still available on the channel you select for the wot_output (for example p259, 5) outputs the pulsetrain on the fuelpump pin; (dont use the same channel for fuel_pump when using it for stimout), dont forget to add an inline series cap from stimout pin (needs to be pulledup with resistor to +5v) when feeding it into the primairy trigger pin - DB