MembersPage/GoranJurkovic/DaewooLaNOS/GoingVEMS (2008-08-12 08:47:34)

My car is equipped with LPG injection kit. So it's Bifuel...

VEMS is up and running, both LPG and gasoline...

Now I have to get as much information as possible, how to start VEMS conversion...

I have a few main goals for VEMS:

  • Enable wasted spark ignition (coil pack) or COP in the future >>> DONE
  • Full sequential injection, both on LPG and petrol. >>> DONE
  • Double maps/configuration so VEMS controls both petrol injectors and LPG injectors (bifuel) >>> Waiting for stable firmware with dual config, ASAP, PLEASE!
  • launch control based on VSS.
  • flat gear swifting based on clutch switch.
  • advance/retard ignition timings per cylinder...

Also some advanced/intelligent configuration switching, like: When driving on LPG, and it passes 5krpm, VEMS automatically switch on petrol...



What do you think? ::)

  • Sounds great, as I have a simular project going on. Except with a 6 cilinder and a Prins Autogas system. :) Keep your page updated!!

Regards, Jan