MembersPage/ErikEnglund/UrQuattroToshiba (2011-06-28 19:20:38)

Hi.

Need some help on building an plugnplay-ecu for an old 10v urquattro running a 25pin toshiba ecu.

Its running the standard three sensor Auditrigger.

Ive connected the Primary VR sensor to EC36/27.

Should I connect the Hallsensor to EC36/13?

Where on the board should i connect the Secondary VR sensor?

urquattro_board.jpg

Thanks for all your help!

Ive come this far:

urquattro_pnp.jpg