This page is a quick reference to the manual for each config value. Also using it as a checklist for each section of the manual that needs changing/updating/adding.
FIRMWARE 1.0.38 QUICK REFERENCE GUIDE.
primep=32 – settings>priming, cranking, afterstart settings> pimepulse(ms)
http://www.vems.hu/manual/html/ch09s02.html
ADD 00 is reasonable. May desire some prime pulse if using throttle body injection, otherwise it is generally unnecessary
primep_temp_scaling=80 - settings>priming, cranking, afterstart settings>Hot start primep temp scaling (%) http://www.vems.hu/manual/html/ch09s02.html
cwl=C8 - settings>priming, cranking, afterstart settings>Crank Cold PW (-40C) (ms) http://www.vems.hu/manual/html/ch09s02.html
cwh=46 - settings>priming, cranking, afterstart settings>Crank warm PW (77C) (ms) http://www.vems.hu/manual/html/ch09s02.html
cranking_thres=03 - settings>priming, cranking, afterstart settings>Cranking Threshold http://www.vems.hu/manual/html/ch09s02.html
awev=28 - settings>priming, cranking, afterstart settings>Afterstart Enrichment, added value (%) http://www.vems.hu/manual/html/ch09s02.html
awev_temp_scaling=98 - settings>priming, cranking, afterstart settings>Afterstart Enrichment scaling at 77C (%) http://www.vems.hu/manual/html/ch09s02.html
awec=FF - settings>priming, cranking, afterstart settings>Afterstart duration, number of engine cycles http://www.vems.hu/manual/html/ch09s02.html
Generally no need to change this, leave as default *MAYBE AIR COOLED ENGINES WOULD WANT TO CHANGE??? IF SO, DESCRIPTION HOW*\n
warmup_clt_range[0]=00 * warmup_clt_range[1]=14 * warmup_clt_range[2]=28* warmup_clt_range[3]=3C* warmup_clt_range[4]=50* warmup_clt_range[5]=64* warmup_clt_range[6]=78* warmup_clt_range[7]=8C* warmup_clt_range[8]=AA* warmup_clt_range[9]=C6*
\n
warmup_clt[0]=AF warmup_clt[1]=AA warmup_clt[2]=A5 warmup_clt[3]=A0 warmup_clt[4]=9C warmup_clt[5]=8C warmup_clt[6]=84 warmup_clt[7]=78 warmup_clt[8]=6F warmup_clt[9]=64
All these at: settings>Warmup Enrichments> Warmup Enrichments, biased at 100
http://www.vems.hu/manual/html/ch09s02.html
ADD 100% Means no enrichment, 200% means double. Get the engine tuned and running properly while warm then adjust the warmup.
warmup_rpm_scale=FF - settings>Warmup Enrichments>% of warmup enrichment at highest RPM (%) http://www.vems.hu/manual/html/ch09s02.html
ADD DESCRIPTION TO MANUAL, I DON’T UNDERSTAND WHY THIS IS NEEDED OR HOW TO IMPLEMENT PROPERLY SO CANT DO A DESCRIPTION YET