MembersPage/Daniel (2009-04-28 21:50:10)

Hi my name is Daniel and running a tuner company In Denmark

Have installed many cars with Ms and would like to try Vems

http://www.racezone.dk

More to come


At the moment I am trying to install Vems V 3.5 on a Honda CRX Del sol whit a B16a2 engine from 93.

I have 2 questions:

Can the vems make the next cylinder trig like the ms? Its because the engine have the trigger in TDC of every cylinder.

Should i write 0 degress or 180 degress in megatune?

I will use the oem igniter in the car, how can i control it?

When I give it ground on the trigger wire it fires the coil, but it dosnt work when i connect it whit vems. I have also tryed to give it a 1K pull up to 12v. But no spark.

Regards Daniel


I am now trying to trig on a toyota 24 tooth CAM-wheel for primary trigger and a 1 tooth camwheel for 2´nd trigger. See InputTrigger/MultiToothNoneMissing

Where should i write the settings? Here are what there are written in the link:

A typical setup is (refer to it as:) 24+1

primary trigger: 24 pulse on cam (or 12 on crank is effectively the same)

tooth_wheel_twidth1=78, tooth_wheel_twidth2=00 (0x78=120 that is 30 deg

secondary trigger: 1 pulse on cam

Regards Daniel