Hello, we just installed Vems 3.5 firmware 1.0.73 on a Toyota 5efte engine. We are running multitooth on a 12-1 wheel in the distributor. Our big problem is that we only have spark on cylindre 1 and 4. The two others we dont have any spark. Do anyone know how to get all the sparks out to one coil?!
Here are our config:
Ignition Settings:
Outputs in use: 00 Only
Ignition driver type: DUMMY
Dual output mode: Disabled. we tryed to enable it
Ingnition output in use: 00 Only
0: 7 Pin 10
Primary Triggersettings:
Edge: Rising
Type: Multitooth
Filtering: Disabled
TDC: 100deg
Number of teeth: 11
triggertooth: 3
Next: 6
Any Help???