MembersPage/Daniel/BMWVEIGHTVANOS (2016-06-21 07:39:53)

Hello, I have some problems here whit the Cam control!

It is a BMW V8, 4.4 Vanos engine.

It have a custom 60-2 wheel on the crank, and the std vanos trigger whell on the intake cams.

Everty thing is fine until i use the cam controle.

When the car starts moving the cam, i get trigger errors!

I have an idea that I have misconfig the trigger settings.

I have uploaded a triggerlog and a config file here:

http://www.vems.hu/files/Racezone/BmwV8vanos/seq%20trigger.vemscfg

http://www.vems.hu/files/Racezone/BmwV8vanos/triggerlog.triggerlog

Any ideas ?

Thanks for your time!

Regards Daniel


Hello Daniel,

Could you provide me with a triggerlog of engine cranking 8-10 seconds without inj and ign fuse ? Your current triggerlog (at engine running) does not provide enough resolution for proper review. Thanks!

Best regards, Dave