TVR Cerbera fitted with AMG E55 engine. 5400cc v8.
ECU: VEMS 3.6. Firmware 1.1.96
Sensors:
-MAP: vems internal sensor.
-IAT: as sold on vems website.
-Coolant: bosch
-TPS: nissan
-Lambda: 1x bosch wideband
-PriTrig: Bosch VR part number 0241210171
no shield on wire. using original engine loom.
-Sectrig: Bosch Hall HA-P2 part number 0232103111
no shield on wire.
Ignition:
-8 x coils direct drive from ECU
Bosch twin single fire coil 2x1 part number 0221503035
2k ohm in plug leads.
all on seperate chanels from ecu
Injectors:
-8 x Standard Bosch for this engine
high impedence 13ohms.
all on seperate chanels from ecu.
Outputs:
-Fuelpump relay
-cooling fan relay
-IAC Bosch double solinoid. not sure how to connect to ecu as all high output drivers are used. could work on stepper outputs but software not allowing.
Timing:
crank trigger 60-2.
missing tooth at 65 deg btdc.
fire order 1-5-4-2-6-3-7-8
Idea:
to run fully sequential ignition. all seems to be working except sectrig.
Contact: curlyracer@hotmail.co.uk