Ignition page for MembersPage/BenNesbitt
- 1997 Audi ABZ 4.2 liter 32valve V8
- firing order: 1-5-4-8-6-3-7-2
17oct spark map as tweaked by VE autotune - at least I did not change the values myself and these are not what I entered ;]
If looking at the fire order: 1548´6372
Put a line break in the middle and you have the cylinders that fire at the same time in each column.
1 5 4 8
6 3 7 2
Where I suggest that the coils are wired like this:
Coil ECU pin
1 35
6 33
5 34
3 36
4 11
7 12
8 24
2 10
The above settings is backwards, you want them filled in like this:
0 Drive_07
1 Drive_05
2 Drive_03
3 Drive_01
4 Drive_07
5 Drive_05
6 Drive_03
7 Drive_01
The dwell is a bit on the high side, 1.8-2mS is probably enough for your coils. 'Coil chargetimie added at 6v' seem fine.
This will probably have to be fine tuned with a timing light. Change 'TDC After trigger(deg)' until the actual and commanded timing is the same.