MembersPage/BenNesbitt/IgnitionPage (2005-09-29 15:28:01)

Ignition page for MembersPage/BenNesbitt

These are the setting that result in some cylinders being off by 90 deg and others by 180 deg. Seem like the math went wrong somewhere...

If looking at the fire order: 1548´6372

Put a line break in the middle and you have the cylinders that fire at the same time in each column.

1 5 4 8

6 3 7 2

Where I suggest that the coils are wired like this:

Coil ECU pin

1 35

6 33

5 34

3 36

4 11

7 12

8 24

2 10

h%5b2%5dtable28sept.jpg

The above settings is backwards, you want them filled in like this:

0 Drive_07

1 Drive_05

2 Drive_03

3 Drive_01

4 Drive_07

5 Drive_05

6 Drive_03

7 Drive_01

igset28sept.jpg

The dwell is a bit on the high side, 1.8-2mS is probably enough for your coils. 'Coil chargetimie added at 6v' seem fine.

trigset28sept.jpg

This will probably have to be fine tuned with a timing light. Change 'TDC After trigger(deg)' until the actual and commanded timing is the same.