new to the site.
Engine Specs:
-VW 2.0 16v ported headed. Built Bottom End
-GT35R
-EP racing manfiolds
-VEMS 3.3
-400kpa built in Map
engine build is done minus the vems
wire harness plugs are here so i made the harness. ecu should be here next week.
harness is going into the car later today
Harness Specs:
-12v IGN: 12AWG to EC36 pin 25
-GND: 12 AWG to EC-36 pins 5,21,22,32,26 sensor GND wire
-Ignition: EC36 pin 34, 36 (coils 2 & 3)
-TPS: EC36 pins 1,29, grnd
-IAT EC36 pin 2
-Injectors EC36 pin 7,19,8, 20
-VR: EC36 pin 27
-Ch5 Output Pin 15 - fuel pump relay
-Ch1 Output Pin 31 - Fan Relay
-Ch4 Output Pin 3 - Shift Light
-Ch0 Output Pin 4 – Tach out
-Analog 7 EC18 pin 12 with input from EC36 pin 29 launch control