Please write about engine details and plans, organize thoughts so we can help verify (to avoid unnecessary delays, the need to modify at home, or other inconvenient results or damage).
Trigger'
- primary trigger VR... 60-2 or ... ?
- secondary trigger HALL or auditrigger ?
Read [product page], consider the To connect the ECU to the application, you may also be interested in: section.
Clearly, some items are missing from the order, eg:
- EC18 wire
- EC36-wire
- LSU4.9 connector and sensor
Verify please
- BridgeOutputDriver
- We only recommend [ETC] for experienced install.
ECU VEMS V3
- EGT input: 2
- ETC BridgeOutput_Interface: 1
- Flyback: HighZ active flyback 8ch
- Hi-side PFET outputs: 4
- ignition driver: 8
- Knock input channels: 0
- LCD connection: no
- MAP connection: 400kPa
- mounting-style: flanged case
- primary_trigger: HALL
- secondary_trigger: HALL
- Service: ASAP
- only makes sense if plans are established and no major accessories are missing
- Special requests: wiki+ordercomment
- withSDcard: removable
- 1-wire interface: No
- 2nd RS232 (RX+TX) and +1 analog input is much more useful than 1-wire
- EC18 wire
- EC36-wire