My page in Russian http://rus.vems.hu/punbb/index.php
Contact with me vems_list_ru (first-d0g, second-d0t), or via irc
Some notes about my experiments with firmware.
- MembersPage/Andrey/KnockEGTRich
- MembersPage/Andrey/FuelFilm
- MembersPage/Andrey/Cranking
- MembersPage/Andrey/ToyotaAT
- MembersPage/Andrey/ToyotaVVTi
- MembersPage/Andrey/Knock
- MembersPage/Andrey/MapFilter
- MembersPage/Andrey/SpeedSensor (and gear boost)
- the speed-sensing input is same as PS2 DATA signal (easy to access with removing only endplate).
- If you want the speed input available on your assembled controller: Ask in order note: choose PS2 option and ask for a FREE cable with overmolded PS2-connector, or instruct PS2/DATA available eg, on EC18/pin2 (or your choice), . This pin is a direct processor pin. It is very sensitive''' (like the mcp3208 inputs). Anything above 5V (eg +12V) or below 0V applied will damage the controller.
- Can you contact me? I havent been ale to contact you: