IssueReports/VemsTune (2009-10-26 09:44:56)

In case of bug reports please do not forget to write

!Round related

Enhanced ergonomics:

Can you give a more detailed info of the scenario


  • I have the same problem(0.9.85)

SD card readout

"SD card overview extended" is only supported in latest (1.1.53 or 54?) firmware that makes entry for each startup (as if data were in different files, still can be read as a sequence of blocks though).


Upload stuff without using any menu-s

An installer says: "When a customer has problems I like to be able to send finished mtt files to him, these can then be sent with command line tools or if he has communication problems I help him with bray over the phone"

Finished files make a lot of sense. It was planned that one would send project file, where the RIGHT firmware and/or config can be uploaded with 1..2 clicks (not lost in menu-s).

Vemstune (or an equivalent .exe or .pif or .bat tool in the same dir) must be verified to work with .vemscfg or .vemsproject file as command line argument. Drag'n'drop file onto running vemstune or it's icon should preferrably do the same.

Note that the vemstune over the network will be very useful in many cases, but dealers still need a way to prepare project / vemscfg files (in a documented way!) that can be uploaded extremely quickly (without using menu-s) by a computer-illiterate child supported over the phone.


This seems to be fixed, please add a note to "F1-help", and DELETE as a confirmation:

-- How can you save a config if there isn´t a way to make new ones?

The program just says "There is no data to save" and nothing get´s saved. So offline tuning and changing still doesn´t work

- Gunni

- At the moment there is no way of just loading a project and start editing the "empty" config and then saving it to a file. It should at least have a Save as.. function so you can actually select to wich file to save the config. I´m talking about setting up a .vemscfg just like you can a .msq from scratch without connecting to a ecu at all. I don´t have a vemscfg cause I can´t save one from scratch and I don´t have a ecu to "download" one. - Gunni -


Gauges


Firmware Version

How do I get 1.0.79 to work with the current version VemsTune?


With 2009.06.25 version can't make map bin above 255 in VE,IGN,Lambda table editor - offline test with 1.1.27 and 1.1.56 vemscfg - more than one report in uk forum too:

http://195.159.109.134/vemsuk/forum/index.php/topic,931.0.html

Still having problems with this even with the latest version of vemstune. When on base setup, bins for kpa are changed to 4>510,it still reads highest kpa on the tables as 255.

is there a solution?

Vasilis P.

Answer: >510 kpa actually is a expert only setting for above 510 kpa sensors that takes extra care, not too many are running over 4 bar boost.

Set it to setting 2 (<510 kpa sensors

//Emil