Planning page for the User guides

See GenBoard/Manual

The main manual is very large and has very little finished data in it, and progressing slowly. So far the best reference is MembersPage/PhatBob/UserGuide which covers significant sections of the installation of an assembled controller. That is what we will continue to enhance.

We want to create three user guides:

1. The installers guide, this is based on Rob Humphries userguide above.

2. The tuners guide which covers software configuration and tuning of the ecu. There is a swedish guy who has written a manual in swedish that need to be finished and then translated. The guide covers megatune and because of that it will be temporary in it's nature as megatune will have to go.

3. The builders guide which is for those who want to build their own ECU.