GenBoard/Manual/Firmware/MyMake (2004-11-25 01:50:22)

my_make file determines (during firmware build process) important properties of the firmware. However, there is nothing to do about it normally

Use the default my_make file that comes in firmware/doc/my_make unless you have a good reason to do otherwise (eg. old board without inverting FETdriver, or 4x16 LCD). Copy my_make file to firmware/etc directory. Don't change to uppercase, or don't (rename) add file extension.\n

# whatever is on a line after a hashmark is just comment: same effect as if it was not there
MY_CONF += -D GENBOARDv3
MY_CONF += -D FETDRIVER_INVERTING
MY_CONF += -D LCD
MY_CONF += -D LCD_4x20
MY_CONF += -D PS2KEYBOARD
MY_CONF += -D BENCHMARK
MY_CONF += -D CELSIUS
# MY_CONF += -D WBO2

You will want to uncomment (remove the '#' from) the WBO2 related line (before building the firmware of course) in order to use WBO2. You have license to do so for firmware that you only use on v3.x board(s) from WebShop. More license info on GenBoard/Manual/License/WBSensor.


See also